有机薄膜电致发光器件失效过程的动态观测及分析

对有机薄膜电致发光器件失效的全过程进行了显微动态观察，发现器件工作时，有机层／金属界面形成的气泡逐渐变大变多，最终导致器件完全失效，气泡不仅含有水汽，还存在大量有机气体。     

Electroanalytical and chromatographic determination of pentachlorophenol and related molecules in a contaminated soil: a real case example

Electroanalytical and chromatographic methodologies have been applied for the determination of pentachlorophenol (PCP) and some of its derivatives in real soil samples contaminated by industrial discharge. The analytes were extracted with hexane from soil samples collected at different points of the site and mixed to produce a representative sample. Square wave voltammetry (SWV) experiments were carried out on either a boron-doped diamond (BDD) electrode or a gold ultramicroelectrode (Au-UME) in an analyte composed by the Britton-Robinson (B-R) buffer at pH 5.5 with the direct addition of proper amounts of the extract. The voltammetric responses revealed an irreversible anodic peak at approximately 0.80 V vs. Ag/AgCl with a peak current showing a linear dependence on PCP concentration. This linear relationship yielded a detection limit (DL) of 2×10⁻⁸ mol l⁻¹ (or 5.5 μg l⁻¹) for the BDD electrode and 6.9×10⁻⁸ mol l⁻¹ (18.4 μg l⁻¹) for the Au-UME, while the independently measured HPLC detection limit was 1.1×10⁻⁸ mol l⁻¹ (3.0 μg l⁻¹). The application of electroanalytical and chromatographic methodologies in the analysis of soil extracts revealed, besides the PCP responses, signals for some related molecules such as o-tetrachlorobenzoquinone (o-chloranil), hexachlorobenzene and tetrachlorophenol. Recovering experiments for PCP showed a concentration of 27.5 mg kg⁻¹ for the electroanalytical determinations and 26.8 mg kg⁻¹ for the HPLC analysis, values exceedingly high if considering that the maximum residue limit established for natural waters by the Brazilian Environmental Agency is 10 μg l⁻¹.     

顶空毛细管气相色谱法测定非那雄胺中有机溶剂的残留量

建立了顶空毛细管气相色谱法测定非那雄胺中二氯甲烷和氯仿两种有机溶剂残留量的方法,并讨论了平衡温度、平衡时间、盐效应对测定的影响。分析结果表明:该法可将两种残留有机溶剂完全分离,具有较好的线性(相关系数分别为0.999 7和0.999 8),检出限为3.2μg/L和0.094μg/L,测定结果的相对标准偏差分别为1.33%和0.89%,样品回收率分别为94%和96%。     

Flow systems exploiting in-line prior assays

An expert sequential injection system involving a prior assay is proposed for spectrophotometric determination of phosphate and eventually zinc in soil extracts. The result of phosphate determination is the basis for a concentration-oriented decision regarding to the need or not for zinc determination. Zinc was only determined if a threshold value (peak height corresponding to 5.0 mg l⁻¹ P) was surpassed. The methods involved formation of molybdenum blue and the Rhodamine 6G/ammonium thiocyanate/Zn²⁺ ternary complex. Variations in the threshold value were < 2% during 4 h operating periods, false responses were not verified, and the analytical time was reduced in about 30%. Precise results (R.S.D. <3% P and < 1% Zn) in agreement with spectrophotometry and flame atomic absorption spectrometry were obtained. The innovation permits faster information processing, as well as a reduction in the number of measurements, number of analytical steps, laboratorial time, and consumption of sample and reagents, thus waste generation.     

芳烃金属配合物在有机合成中的应用

本文讨论了芳烃金属配合物中的芳香部份在与金属配合后性质上的变化,以及这些变化后的性质在有机合成中的应用。     

热活化延迟荧光聚合物及其电致发光器件

热活化延迟荧光(TADF)聚合物,不仅具有小分子TADF材料高的激子利用效率特性,而且还具备分子多样性好、可溶液加工、低成本、以及易实现大面积柔性器件等诸多优势,在近几年受到广泛的关注并展现了良好的应用前景。本文从TADF聚合物分子设计原理、器件结构及发光机理出发,依据TADF聚合物的构筑方法不同,概括了其结构设计策略,详述了各种类型TADF聚合物的分子结构和光电性能及其在有机电致发光器件领域应用的研究进展,最后探讨了TADF聚合物存在的问题,并展望了其发展前景。     

氧化铽团簇的表面修饰及对其荧光特性影响的研究

采用脉冲激光轰击浸于流动相中的氧化铽固体靶，考察了流动相及其流速、脉冲激光输出功率、修饰剂、添加修饰剂顺序等对所获得的氧化铽有机溶胶荧光性能的影响。UV-Vis和荧光光谱的测试表明：以含有修饰剂的无水乙醇作为流动相，可得到良好荧光性能的氧化铽乙醇溶胶，而环己酮与醋酸乙酯均不适合作为该体系的流动相;最佳流速为0.15 mL·s^-1；脉冲激光输出功率大有利于其荧光性能；最佳修饰剂为乙酰丙酮(acac)和2，2′-联吡啶(2，2′-bipy)，且应原位修饰。     

农作物秸秆解聚研究

农作物秸秆是重要的生物质资源。本文从我国建立资源节约和环境友好社会目标的角度,论述了农作物秸秆高效利用的重要性和研究农作物秸秆解聚对开发农作物秸秆高效利用的新工艺的重要意义。介绍了农作物秸秆解聚的典型工艺及解聚产物组成分析和利用研究的进展,预测了农作物秸秆解聚研究的发展方向。     

非弹性体增韧—聚合物增韧的新途径

本文是一篇关于非弹性增韧方法的综述。文章首先简要回顾了传统的橡胶增韧韧性聚合物材料的机理,然后着重介绍了最近在国外出现的刚性有机填料(ROF)增韧的基本概念、分析方法和增韧的冷拉机理,列举了脆性塑料粒子和韧性基体组成的合金体系的大量实验结果来说明以上内容,最后通过与传统橡胶增韧机理的对比指出非弹性体增韧是不同于后者的一种新增韧方法,并有可能成为制备高强度、高韧性工程塑料的一种新途径。